Good Quality Screw Pump - Single metal screw pump – Top

Short Description:

Principle of Products HXBS metal single screw pump is a rotor-type displacement pump, which depends on the interaction of screw (rotor) and bushing (stator) to produce volume change in the suction chamber and the discharge chamber to transport the liquid. It is a kind of closed screw pump with internal meshing. The main working part consists of a bushing (stator) with double helical cavity and a single helical screw (rotor) in the stator cavity. When the input shaft makes planetary revolving ...


Product Detail

Product Tags

Related Video

Feedback (2)

Being supported by an advanced and specialist IT team, we could give technical support on pre-sales & after-sales services for X52 Carbon Steel Pipe , Carbon Steel Pipe 316l , Asme Sa106c Boiler Steel Pipe , We sincerely welcome overseas customers to consult for the long-term cooperation and the mutual development.We strongly believe that we can do better and better.
Good Quality Screw Pump - Single metal screw pump – Top Detail:

Principle of Products

HXBS metal single screw pump is a rotor-type displacement pump, which depends on the interaction of screw (rotor) and bushing (stator) to produce volume change in the suction chamber and the discharge chamber to transport the liquid. It is a kind of closed screw pump with internal meshing. The main working part consists of a bushing (stator) with double helical cavity and a single helical screw (rotor) in the stator cavity. When the input shaft makes planetary revolving around the center of the stator through the universal joint to drive the rotor the stator-rotor pair is in continuous mesh to form sealed cavity. The seal chamber makes uniform axial movement with invariable volume, delivering the pumped medium from the suction end to the extrusion end via the stator-rotor pair. The medium inhaled in the closed cavity flows through the stator without being stirred or damaged.

The inner surface of the bushing has double threads, and its arbitrary section is a long circle, and the two ends are semicircles with radius R (equal to the radius of the screw section), and the middle is a linear segment with the length of 4e. Any cross section of the bushing is the same long circle, but staggered with each other at an angle.

After the screw is inserted into the bushing, a closed chamber is formed between the screw surface and the internal thread surface of the bushing. At the same time, any section is divided into two crescent work chambers. As the screw rotates, the volume of the first chamber near the suction chamber gradually increases, forming negative pressure, and the liquid is sucked into the chamber under the action of differential pressure. As the screw continues to rotate and the chamber volume increases to its maximum, the chamber is closed and the liquid is pushed axially out of the chamber. At the same time, the upper and lower work chambers rotate in and out of the liquid, so that the liquid is continuously pushed from the suction chamber to the pressure chamber along the axis.

Parameters of HXBS Metal Stator Screw Pump Series 

 Model

Theoretical discharge capacity

ml/r

Number of stages Daily fluid production rate m³/d Applicable temperature    Maximum number of revolutions  

r/min

 Applicable oil pipe Lifting height  

m

Applicable pumping rod  
HXGLB80-16

80

16

4-10

≤350 250 27/8″TBG 600 CYG25H
HXGLB80-24

80

24

4-10

≤350 250 27/8″TBG 900 CYG25H
HXGLB80-32

80

32

4-10

≤350 250 27/8″TBG 1200 CYG25H
HXGLB110-18

110

18

8-15

≤350 250 27/8″TBG 750 CYG25H
HXGLB110-24

110

24

8-15

≤350 250 27/8″TBG 1000 CYG25H
HXGLB110-30

110

30

8-15

≤350 250 27/8″TBG 1200 CYG25H
HXGLB160-18

160

18

12-25

≤350 250 31/2″TBG 750 CYG25H
HXGLB160-24

160

24

12-25

≤350 250 31/2″TBG 1000 CYG25H
HXGLB160-30

160

30

12-25

≤350 250 31/2″TBG 1200 CYG25H
HXGLB210-20

210

20

16-30

≤350 250 31/2″TBG 900 CYG25H
HXGLB210-25

210

25

16-30

≤350 250 31/2″TBG 1100 CYG25H
HXGLB300-20

300

20

20-40

≤350 250 4″TBG 900 CYG25H
HXGLB300-25

300

25

20-40

≤350 250 4″TBG 1100 CYG25H
HXGLB350-17

350

17

25-50

≤350 250 4″TBG 800 CYG25H
HXGLB350-21

350

21

25-50

≤350 250 4″TBG 1000 CYG25H

Product detail pictures:

Good Quality Screw Pump - Single metal screw pump – Top detail pictures

Good Quality Screw Pump - Single metal screw pump – Top detail pictures

Good Quality Screw Pump - Single metal screw pump – Top detail pictures


Related Product Guide:
Cooperation

We depend on sturdy technical force and continually create sophisticated technologies to meet the demand of Good Quality Screw Pump - Single metal screw pump – Top, The product will supply to all over the world, such as: Costa Rica, Saudi Arabia, Argentina, It is our customers' satisfaction over our products and services that always inspires us to do better in this business. We build mutually beneficial relationship with our clients by giving them large selection of premium car parts at marked down prices. We provide wholesale prices on all our quality parts so you are guaranteed greater savings.
  • Timely delivery, strict implementation of the contract provisions of the goods, encountered special circumstances, but also actively cooperate, a trustworthy company!
    5 Stars By Frances from Bangkok - 2018.12.11 14:13
    The factory technical staff not only have high level of technology, their English level is also very good, this is a great help to technology communication.
    5 Stars By Martin Tesch from Mombasa - 2018.09.16 11:31

    Related Products